Nominal pore diameter
Size ratio up to grade (%)
Bulk density (g/ml)
Wear ratio (%)
Crushing strength (N)
Static H2O adsorption (%)
Static CO2 adsorption (%)
Water content (%)
Typical Chemical Formula
Na2O . Al2O3 . 2.45SIO2 . 6.0H2O (SiO2 : Al2O3 ≈2.6-3.0)
Removal of H2O from air fro air cryo-separation application
a) By National Standard HG-T_2690-2012
b) Offer lifetime consultation on problems occurred
Guangdong Xintao molecular sieve Type 13X APG can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.
To remove moisture from a 13X APG molecular sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptans or CO2 levels below 2ppm.
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process
13X APG- Zeolite are available in beads of 1-2 mm(10x18 mesh), 2-3 mm(8x12 mesh), 2.5-5 mm(4x8 mesh) and as powder, and in pellet 1.6mm, 3.2mm.
To avoid damp and pre-adsorption of organic before running, or must to be reactivated.